Пластик изменить путь Двусторонняя прямого Пластик шланг Совместное Водопровод передачи глава DIY Физика обучения эксперимента Запчасти

175 руб.

Описание

Brand newPEMaterial, pressure resistance, high temperature100Degree, non-toxic, environmental protection.

PEChemistry Chinese name is polyethylene,PEBecause of its high strength, high temperature resistance, corrosion resistance, non-toxic, wear-resistant and other characteristics, it has been widely used in the field of water supply and drainage manufacturing. Because it won't rust, it is the ideal pipe instead of ordinary iron pipes.

General hose retractable, such as the direct switching head diameter is 9MM, then you can insert the hose diameter range is about 8-9MM, the silicon tube elasticity, even 7MM can be inserted into the same, if it is 4MM, you can insert the hose diameter range is about 3-4MM.

4.8-7.9 and 3.9-6.4 two are semi transparentHere are some pictures.

3.9-6.43-4mm

The inner diameter of 5-6mm is the silica gel tube.

The following can click on the corresponding picture or text to view and buy:

Two series connection: click on the image to view details

Three - way, four - way, five or six - way series connection: click on the image to view details

: click on the image to view details

Little common sense:

1: silicone tube, hose, is to see the inner diameter of the pipe, with the outer diameter does not matter. For example, 7*10MM, 8*12MM silicone tube, are the use of this section of 8MM connector. Because you just need to see the inside diameter!

2: plastic pipe, hard tube, is to see the outer diameter of the pipe collocation, useThis is similar to pneumatic fittings, no need to look inside how many. For example, 7*10MM and 6*10MM plastic pipes are all pneumatic joints using 10MM. If it is 7*12MM, you need to use the pneumatic connector of 12MM!